Harnesses and Harness Accessories
Grainger Wire Rope Oval Sleeve 3/16 in Copper
The LOOS Wire Rope Oval Sleeve is an oval-shaped wire rope sleeve made of drop forged steel with a zinc plating. It is designed to fit 1/4" wire rope and has an opening width of 0.27". The working load limit is 1,260 lbs. This wire rope sleeve can be used for a variety of securing and rigging applications to protect the end of wire rope from fraying. The oval shape provides a smooth, finished look. Overall, this is a high-strength, corrosion-resistant wire rope end fitting for 1/4" diameter wire rope.
Grainger Wire Rope Thimble 1/4 in Rope Dia SS
The Dayton 1/4" Wire Rope Thimble is made of galvanized steel for corrosion resistance. It has a load limit of 1 ton and is compatible with 1/4" wire rope. The thimble measures 1-1/4" long x 15/16" wide x 1/2" high. It features a closed eye design to prevent fraying and accommodate wire rope clips. The Dayton thimble is an economical option for creating loop terminations in lifting applications.
Grainger Wire Rope Oval Sleeve 5/16 in Copper
The LOOS Wire Rope Oval Sleeve is an oval-shaped wire rope sleeve made of malleable cast iron. It has an inside diameter of 1-1/4", fits 1/4" wire rope, and is 3-1/2" long. This wire rope sleeve is uncoated and is rated at a safe working load of 1 ton. It can be used to form eyes on the ends of wire rope for attachments. This wire rope oval sleeve is made in the USA by Loos & Co.
Grainger Wire Rope Oval Sleeve 1/16 in Copper
The LOOS Wire Rope Oval Sleeve is an oval-shaped wire rope end fitting made of drop forged steel with a zinc finish. It is designed to terminate wire rope by inserting the rope and compressing with a press. This oval sleeve accommodates 1/4" wire rope, has an opening width of 0.28", fits rope diameters from 0.20" to 0.25", and weighs 0.06 lbs. The working load limit is 1,260 lbs. This wire rope end fitting provides a permanent loop and is ideal for creating attachments and connections.
Grainger Wire Rope Thimble 5/32 in Rope Dia SS
The Loos Wire Rope Thimble is made of galvanized steel with a 5/32 inch inside diameter. It is designed to fit 5/32 inch wire rope and protect it from wear. The thimble has a closed round eye and tapered barrel. It can be used in a variety of rigging applications to prevent fraying and extend the life of wire rope. The thimble is rated up to 1 ton working load limit.
Grainger Wire Rope Oval Sleeve 5/16 in SS
The LOOS Wire Rope Oval Sleeve is an oval-shaped wire rope sleeve made of drop forged steel with a zinc finish. It is designed for securing the ends of 1/4 inch and 5/16 inch diameter 7x7 and 7x19 wire rope. The sleeve has a nominal length of 1-3/4 inches, width of 13/16 inches, thickness of 3/8 inches, and weight of 0.6 lbs. This wire rope end fitting provides a permanent loop termination and protects against fraying. It is rated at 1700 lb minimum breaking strength. The oval sleeve is easy to install using a hammer to swage it onto cut wire rope ends. This wire rope fitting can be used in a variety of rigging, hoisting, and securing applications.
Grainger Wiring Harness 10 ft.
The Edwards Signaling 10 ft Wiring Harness is a 10 foot long wiring harness for fire alarm systems. It is made of 18 AWG wire with a PVC jacket and has 10 conductors. The harness has plugs on both ends that allow it to easily connect devices like pull stations, smoke detectors, horns and strobes. It can handle up to 600 volts and meet UL and NEC standards. The harness provides a pre-wired solution for installing alarm devices and reduces installation time.
Grainger Wire Rope Stop Sleeve 5/16 in Copper
The Loos Wire Rope Stop Sleeve Stop is a wire rope fitting designed to prevent fraying of wire rope ends. It is made from drop-forged steel and has a working load limit of 9,000 lbs. The sleeve has an opening diameter of 1/2 inch and fits 6x19 and 6x37 class wire rope. It can be installed using common hand tools and helps protect workers from the dangers of frayed wire rope ends. The sleeve works by compressing the wire rope strands under the tapered cone. Overall this is a heavy duty wire rope stop fitting for securing rope ends.